So what is Raspberry Pi 3.
Main difference between Raspberry Pi 3 and Raspberry Pi 2 is you don't have to buy Wireless adapter. It's built in (so extra usb port).
Also now built in Blueetooth support.
SoC: Broadcom BCM2837 (roughly 50% faster than the Pi 2)
CPU: 1.2 GHZ quad-core ARM Cortex A53 (ARMv8 Instruction Set)
GPU: Broadcom VideoCore IV @ 400 MHz
Memory: 1 GB LPDDR2-900 SDRAM
USB ports: 4
Network: 10/100 MBPS Ethernet, 802.11n Wireless LAN, Bluetooth 4.0
For Raspberry Pi 3, Broadcom have supported us with a new SoC, BCM2837.
This retains the same basic architecture as its predecessors BCM2835 and BCM2836, so all those projects and tutorials which rely on the precise details of the Raspberry Pi hardware will continue to work.
The 900MHz 32-bit quad-core ARM Cortex-A7 CPU complex has been replaced by a custom-hardened 1.2GHz 64-bit quad-core ARM Cortex-A53.
Combining a 33% increase in clock speed with various architectural enhancements, this provides a 50-60% increase in performance in 32-bit mode versus Raspberry Pi 2, or roughly a factor of ten over the original Raspberry Pi.
All of the connectors are in the same place and have the same functionality, and the board can still be run from a 5V micro-USB power adapter. This time round, we’re recommending a 2.5A adapter if you want to connect power-hungry USB devices to the Raspberry Pi.
Main difference between Raspberry Pi 3 and Raspberry Pi 2 is you don't have to buy Wireless adapter. It's built in (so extra usb port).
Also now built in Blueetooth support.
SoC: Broadcom BCM2837 (roughly 50% faster than the Pi 2)
CPU: 1.2 GHZ quad-core ARM Cortex A53 (ARMv8 Instruction Set)
GPU: Broadcom VideoCore IV @ 400 MHz
Memory: 1 GB LPDDR2-900 SDRAM
USB ports: 4
Network: 10/100 MBPS Ethernet, 802.11n Wireless LAN, Bluetooth 4.0
For Raspberry Pi 3, Broadcom have supported us with a new SoC, BCM2837.
This retains the same basic architecture as its predecessors BCM2835 and BCM2836, so all those projects and tutorials which rely on the precise details of the Raspberry Pi hardware will continue to work.
The 900MHz 32-bit quad-core ARM Cortex-A7 CPU complex has been replaced by a custom-hardened 1.2GHz 64-bit quad-core ARM Cortex-A53.
Combining a 33% increase in clock speed with various architectural enhancements, this provides a 50-60% increase in performance in 32-bit mode versus Raspberry Pi 2, or roughly a factor of ten over the original Raspberry Pi.
All of the connectors are in the same place and have the same functionality, and the board can still be run from a 5V micro-USB power adapter. This time round, we’re recommending a 2.5A adapter if you want to connect power-hungry USB devices to the Raspberry Pi.
No comments:
Post a Comment